d55342/07 thin film chip resistor 1206 size, surface mount, solderable state of the art, inc. 2470 fox hill road, state college, pa 16803-1797 phone (814) 355-8004 fax (814) 355-2714 toll free 1-800-458-3401 where quality isn't a goal...it's our tradition typical life test performance current noise power derating power dissipation features ? tolerances to 0.1% ? operating temperature range : -55 c to +150 c ? pretinned (sn60) nickel barrier terminations ? tcr's to 25 ppm ? suitable for solder reflow, vapor phase, or wave solder attachment performance characteristics two packaging options are available: waffle pack - (140 per tray max.) tape & reel - (5000 per 8" inch reel max.) packaging options termination type wraparound style (pretinned with a ni barrier), and type w (wire bondable) are available. also available in thick film mil-prf-55342 characteristi ck&m. sotaof fers a full line of component parts in the 1206 size including standard grade, high-reliability (customer specified testing), and zero- ohm jumpers. custom part marking is also available. 10/01/97 all product levels are based on the same design as our "r" level failure rate established reliability part. level c is a non-established reliability part requiring no group a, b or c testing. established reliability (failure rates based on life testing) product levels m,p, and r are subject to group a, b and c testing per mil-prf-55342. space product level t requires group a and b tests including 100% power conditioning. * product levels part numbering d55342 h 07b 100d r product level designator* m: 1% per 1000 hrs. r: 0.01% per 1000 hrs. p: 0.1% per 1000 hrs t: space level c: non - er tcr e: 25 ppm h: 50 ppm k: 100 ppm resistance and tolerance code three significant digits, with a letter indicating the decimal location, and the tolerance, and the value range (,k,m) a: 0.1% d: 1% g: 2% j: 5% m: 10% b: 0.1%k e: 1%k h: 2%k k: 5%k n: 10%k c: 0.1%m f: 1%m t: 2%m l: 5%m p: 10%m ww w wwww w ww w w w ww w w w mechanical inches .126 (+.008/-.008) .063 (.005) .015 - .033 .010 - .025 .010 - .025 .0088 grams length width thickness top term. bottom term. approx. weight mm 3.20 (+.20/-.20) 1.60 (.13) .38 - .84 .25 - .64 .25 - .64 protective encapsulant wraparound terminations pretinned 99.6% alumina chip precision thin film resistor resistance range 5.6 - 1m tolerances 0.1%,1%, 2%, 5%,10% maximum power 250 mw maximum voltage 100 volts ww tcr (-55 to +125 c in ppm/ c) thermal shock low temperature operation short-time overload resistance to bonding exposure moisture resistance high temperature exposure life <25ppm 0.02% 0.02% 0.02% 0.02% 0.03% 0.03% see chart (1) resistance range for 0.1% tolerance is 100 ohms to 1 m ohm. (2) maximum power for e and h tcr is 125 mw. (3) typical resistance change, the maximum is the same as mil-prf-55342. test methods are per mil-prf-55342. solderability: solder coating compatible with sn60, 62 or 63 solders, provides good wetting with all types of solder attachment. all product is tested iaw mil-std-202, method 208, including 8 hour steam aging. environmental performance (3)
|